top of page

CROSS BLADE DSC

 

catapults the iconic Switchblade design of the 90s into the here and now. The fork is designed for XC and gravel use and fits perfectly with classic 1 1/8” straight head tubes. As with all of our forks, you can set the installation height to create the perfect geometry for your custom bike. The dropouts are bonded to the titanium blades and offer you a 160mm flatmount direct mount. All other parts are bolted and interchangeable.

​

AERO KIT (only for DSC version, optional)

contains a LEZYNE air pump, a matching pressure spring and an EXTRALITE Ultrastar expander. This allows you to make perfect use of the empty space in the right fork leg and always have a powerful pump with you, rattle-free and protected from dirt.

SPECS
 
Headset: ZS40/30 or EC44/40
ATC height: 390-430mm
Hub standard: 12x100mm
Rake: 45mm @430mm
Tire clearance: 15mm at 29 “x2.25” @430mm
Brake mount: Flat Mount Direct 160mm
Steerer CrMo: Columbus 275mm 1 1/8”
Steerer Titanium: Ti3Al2.5V 205mm 1 1/8”
Crown: Al7075T6 with 6.0° rake
Dropouts: Al7075T6
Blades: Ti3Al2.5V (1.2mm)
Weight: 945g (TI steerer 205mm)
Made in Germany


SCOPE OF DELIVERY
 
CROSS BLADE fork
DT Swiss Thru Axle
Plug for cable routing (left)


TIRE CLEARANCE

The tire clearance depends on the wheel radius, the installation height of the fork and the height of the fork crown. We recommend a tire clearance of no less than 15 mm. With the selected tire clearance you can easily calculate the required installation height ATC (axle to crown):

Installation height ATC = tire radius - tire clearance - fork crown height (46.5mm)


OPTIONS
 
The standard installation height in the store is 430mm. Shorter versions and lateral threads in the fork legs are available on request. Titanium bolts and a titanium steerer tube are optionally available. Please write us a short mail.


ASSEMBLY INSTRUCTION

bottom of page